You Should Be Using TRR Outlets According to an Electrician in the Woodlands, Part 2 --
In our last article, we discussed how TTR outlets should be used around children. We discussed how an electrician in The Woodlands can install this tamper-resistant outlet. Remember, it features a safety device inside. It has spring-loaded shutters inside the two vertical outlet slots.
When you push a plug into the outlet, the two straight blades of the plug push on the shutters at the same time; this makes the shutters open so the plug can be inserted all the way. This mechanism keeps the outlet safe for your child. Today this article discusses how to install one.
How to Replace an Old Outlet, According to an Electrician in The Woodlands
Replacing a dated outlet with a newer tamper-resistant one doesn't necessarily require an electrician in The Woodlands. Remember to make sure the power is off at the breaker box. Then make sure to test for power at the outlet before touching any wires.
Step 1: Shut off the power
Open the breaker box in your home. In many cases, this information is listed on a label on the electrical panel's door or right next to each circuit breaker. Flip the appropriate breaker to the "off" position to shut off the power to the circuit.
Step 2: Remove the Outlet Cover and Test for Power, According to an Electrician in The Woodlands
Use a multimeter to confirm the power is off. Remove the cover, and check the wires connect to the outlet.
Step 3: Take off the Outlet Screws
Remove the screws holding the outlet to the electrical box. Remember where each wire connects, and take a picture with your phone. If you're concerned you might not connect things properly, refer to the picture of the old outlet with its wiring intact. If you still have concerns after the installation and things are not working properly, call an electrician in The Woodlands to help out.
Call us today for premium lighting repair in The Woodlands
Step 4: Remove the Wires from the Old Outlet
Loosen the screw terminal holding each wire in place on the old outlet and disconnect the wire from the outlet. Set the old outlet aside.
Step 5: Time to Install the New Wires
Attach the wires to the terminals on the new outlet exactly as they were on the old one. The white wire is neutral and connects to a gray screw. Strengthen the screw terminals firmly, making sure each wire is held firmly in place.
We know “watt” you need; call us and see for yourself!
Step 6: Put the Outlet back
If everything appears to be working properly, than put the outlet back in place.
Step 7: Restore Power to the Outlet
Switch the circuit breaker back to the "on" position to restore power to the circuit. Now try plugging in something to test the outlet.
If you have a large number of outlets that need to be replaced and you are not familiar with electrical work, it is best to leave it to an electrician in The Woodlands. TTRs are very important, especially in old homes, and could save your child’s life. Please call on Unity Services for all your TTR needs.
Unity Services provides a broad range of electrical services to meet the needs of our client base, from a light Industrial electrician in The Woodlands to large jobs requiring a master electrician in Woodlands, as we currently have one master electrician on staff. Unity Services has a solution, and we know how to get the job done in a timely, professional, and cost-effective manner.
Unity Services is available 24 hours a day, seven days a week for emergency service. Our electrical repair company in Woodlands provides clients with expert knowledge that’s just a phone call away. Our electricians will ask a few questions and work with you to quickly solve the issue.